Supplier shortlist and RFQ qualification guide

China Humanoid Robot Ankle Joint Supplier Guide

Screen company scope, compare supplier evidence and set sample gates before sourcing a humanoid robot ankle joint in China. The public-source leads below are not verified complete ankle suppliers.

By Custom Humanoid Actuator, publisher of Custom Humanoid Actuator (CHA). This page compares public company materials and provides a buyer-side diligence method; it does not report factory audits, supplier endurance tests or customer outcomes.

Supplier qualification brief builder

Set the proposed delivery scope, purchase stage and main open gap to prepare a focused diligence request. This does not certify a supplier.

1. Expected supplier delivery (required)

Choose the narrowest scope the RFQ is asking the supplier to own.

2. Procurement stage (required)

The evidence gate changes between discovery, sample and pilot.

3. Main open qualification gap (required)

Choose the gap that currently blocks a comparable supplier decision.

Procurement scope unknown? Use the manual RFQ checklist

Your supplier screening brief

The result will name the requested delivery scope, stage gate and missing evidence. It does not rank suppliers or validate product claims.

No supplier is preselected. Compare written evidence for the same model, BOM, quantity and test conditions.

Published:

Last reviewed:

Supplier leads and evidenceRFQ qualification checklist

Define what the supplier is expected to deliver

A supplier name does not tell you whether the quote covers one component, an integrated actuator or the complete pitch/roll ankle. Set that boundary first so the engineering and commercial responses can be compared on the same basis.

Delivery boundary and minimum evidence to request
Supplier scopeWhat the buyer may still ownRequest before comparison
Reducer or motor componentA gearbox, motor or other single component; the buyer or integrator owns the remaining design and validation.Part number, interface drawing, rated/repeated limits, bearing loads and traceable material or inspection records.
Integrated joint actuatorA motor, transmission, encoder and possibly driver in one unit; the buyer still owns ankle mechanics and installed qualification.Delivered BOM, torque-speed and derating data, driver limits, mounting interface and test conditions.
Complete ankle assemblyA pitch/roll mechanism with housing, bearings, actuators, wiring and defined system responsibility.Both-axis interfaces, coupled-load assumptions, assembly acceptance plan and ankle-level cycle evidence.

Qualify the company, model and sample in separate gates

Use evidence tied to the quoted model and revision. A company-level humanoid actuator statement, a catalog rating and a successful sample test answer different questions; none substitutes for the others.

Supplier screening gates for a humanoid ankle program
GateBuyer requestReady-to-advance evidence
1. Verify supplier identityWho manufactures each quoted item? Identify the contracting entity, production site, authorized sales channel and any subcontracted work.A consistent legal entity, factory scope and named owner for design changes and nonconformances.
2. Freeze the delivery boundaryRequest a model-specific BOM and interface drawing. Mark motor, reducer, encoder, driver, brakes, bearings, housing and cables as included or excluded.The quote and drawing describe the same assembly and revision; integration work has one named owner.
3. Check engineering evidenceRequest torque-speed curves, repeated and momentary limits, thermal derating, bearing loads, backlash or lost motion, and the conditions behind each value.Evidence is for the quoted model and states units, setup, duration, temperature and revision.
4. Agree sample acceptanceDefine the representative load cycle, measurement method, pass limits, sample quantity and failure reporting before purchase.A signed protocol and traceable results exist before a sample result is used to release a pilot.
5. Close commercial and lifecycle gapsCompare prototype and pilot price, NRE, MOQ, lead time, shipping terms, warranty, spares, firmware access and change notification.Quotes use the same delivered scope, destination, quantities, validity and support assumptions.

China humanoid ankle supplier leads in public sources

This is a non-exhaustive lead list, not a ranking or endorsement. None of the cited pages documents a complete ankle assembly with model-specific load-cycle qualification. Confirm current product availability and the exact contracting entity directly with each company. Supplier facts and limits were checked October 2, 2026.

Leaderdrive

Strain-wave gears; rotary actuators listed separately

Public record: The product page describes both reducer components and a separate rotary-actuator line.

Ask before shortlisting: Exact actuator model, included electronics, output interface, repeated-impact limits and ankle-cycle evidence.

Leaderdrive: strain-wave gears and rotary actuators

Laifual Drive

Harmonic reducers and integrated joint modules

Public record: The catalog describes a joint module integrating a reducer, motor and encoder.

Ask before shortlisting: Confirm driver inclusion, delivered BOM, output interface and thermal records for the quoted assembly.

Laifual: reducers and joint modules

Nantong Zhenkang

RV reducer component families

Public record: The official product range lists ZKRV-E and ZKRV-C families.

Ask before shortlisting: Model dimensions, mass, bearing arrangement, duty limits and who owns motor, housing and ankle integration.

Nantong Zhenkang: RV product range

Unitree Robotics

GO-M8010-6 robot-joint motor example

Public record: Its product page publishes reduction ratio, voltage, communication and feedback details for this motor.

Ask before shortlisting: Confirm the intended model, output-side limits, control access and mounting arrangement; the page does not establish H1/G1 ankle interchangeability.

Unitree: GO-M8010-6 motor

CubeMars

AK80-9 V3.0 integrated rotary actuator example

Public record: The product page lists 9 Nm rated torque, 22 Nm peak torque and a 9:1 planetary gearbox; named applications include legged robots, exoskeletons and AGVs.

Ask before shortlisting: Continuous and repeated-impact limits under the intended cycle, installed cooling and mounting conditions.

CubeMars: AK80-9 V3.0 product specifications

Tuopu Group

Humanoid actuator R&D, manufacturing and system integration

Public record: An archived official division page describes this scope; it does not identify an ankle model or performance data.

Ask before shortlisting: Current product availability, proposed actuator and ankle interface, load curves, qualification evidence and integration responsibility.

Tuopu Group: Robot Actuator Division (archived page)

Sanhua Intelligent Control

Mechatronic actuator development for humanoid robots

Public record: The company describes developing actuator products for bionic-robot requirements; the source does not identify ankle-specific models.

Ask before shortlisting: Proposed model, development or production status, dimensional CAD, ratings, life-test evidence and quote scope.

Sanhua Intelligent Control: electromechanical actuator disclosure

Supplier status is not the same as supplier approval. These links establish only the scope described in each source; they do not confirm quote availability, factory capability or performance in a particular robot.

Send a like-for-like ankle joint RFQ

Give each candidate the same drawing revision, quantity, destination and intended load cycle. If a requirement is unknown, mark it as an open item instead of letting suppliers price different assumptions.

RFQ inputs and supplier return package
Quote sectionBuyer suppliesSupplier returns
Quoted scopeRequired pitch/roll axes, quantities, delivery destination and target build stageItemized BOM, included/excluded parts, integration owner and drawing revision
Engineering fitEnvelope, mass target, bus voltage, communications and mounting interfacesModel-specific drawings, torque-speed data, bearing limits and thermal derating
ValidationRepresentative gait, hold, fall or landing cases and acceptance limitsTest method, sample conditions, cycle count, traceable results and open deviations
Manufacturing qualityCritical dimensions, material or process controls and traceability needsInspection plan, sample records, change control and nonconformance process
Commercial and lifecyclePrototype and pilot quantities, forecast, timing and support expectationsUnit price, NRE, MOQ, lead time, Incoterms, warranty, spares and quote validity

Request an ankle supplier review

Share your brief, CAD revision and unanswered supplier questions with Custom Humanoid Actuator. This is an inquiry to our team; we do not represent the companies listed above.

Start a supplier inquiry

Commercial and qualification risks to close before release

Supplier sourcing risks and purchasing controls
RiskDecision impactMinimum control
Product-page scope mistaken for a qualified ankleA component, actuator module or company division can be relevant without a complete ankle model being available.Record each public claim and its limit; make ankle-level drawings and acceptance evidence a sourcing gate.
Different BOMs compared as if they were equivalentReducer-only pricing can omit the motor, driver, bearings, housing, cables, fixture and integration work.Normalize every quotation to the same delivered assembly and show NRE separately.
Peak rating accepted without test conditionsA headline peak value does not specify duration, repetition, temperature or installed cooling.Request the source curve and conditions, then define a witnessed sample test against the robot load cycle.
Sample approval silently becomes production approvalOne prototype cannot establish process capability, life or repeatability across a pilot batch.Set separate sample, design-validation and pilot-release evidence gates in the purchase documents.
Unowned design or firmware changesAn undocumented substitution can change fit, control behavior, thermal limits or serviceability.Agree revision control, approval rights, firmware access and advance change notification before release.

Evidence register and limits

We review this guide every six months and when cited product documentation changes; next scheduled review: April 2, 2027. The source list is public supplier evidence, not an independent factory audit or a verified performance comparison.

Source, supported claim, limitation and review date
Primary sourceWhat it supportsLimit and date
Harmonic Drive: gear-unit rating tableSeparates rated, repeated-peak and momentary-peak torque, with model-specific backdriving and stiffness data.

Reducer ratings are not a complete ankle or motor thermal qualification.

Undated catalog; checked October 2, 2026

maxon: On the heating of motorsExplains current-related heating, speed losses and the effect of the motor controller.

General motor guidance in a hand-tool context; it supplies no humanoid walking-time limit.

Updated August 29, 2024; checked October 2, 2026

Leaderdrive: strain-wave gears and rotary actuatorsLists strain-wave gear products and a separate rotary-actuator product line.

Does not establish suitability for a particular ankle load cycle.

Undated catalog; checked October 2, 2026

Laifual: reducers and joint modulesLists harmonic reducers and integrated joint modules containing a reducer, motor and encoder.

Driver inclusion, ankle interfaces and application ratings need a model-specific quotation.

Undated catalog; checked October 2, 2026

Nantong Zhenkang: RV product rangeLists ZKRV-E and ZKRV-C reducer families.

A reducer listing does not verify a complete humanoid ankle assembly or landing endurance.

Undated product page; checked October 2, 2026

Unitree: GO-M8010-6 motorPublishes a robot-joint motor with reduction ratio, voltage, communication and feedback specifications.

This component listing does not prove interchangeability with H1/G1 ankle modules.

Undated product page; checked October 2, 2026

CubeMars: AK80-9 V3.0 product specificationsLists the AK80-9 V3.0 as a 9 Nm rated, 22 Nm peak integrated actuator with a 9:1 planetary gearbox; its application list names legged robots, exoskeletons and AGVs.

The published peak figure and application list do not establish ankle suitability or installed continuous-duty performance.

Product page; checked October 2, 2026

Tuopu Group: Robot Actuator Division (archived page)Identifies a humanoid robot actuator division focused on R&D, manufacturing and system integration.

The archived page does not identify ankle-specific models, types, ratings or qualification data.

Archived corporate division page; checked October 2, 2026

Sanhua Intelligent Control: electromechanical actuator disclosureStates that Sanhua is developing mechatronic actuator products for bionic-robot requirements.

The cited page does not publish model-specific ankle interfaces, ratings or qualification results.

Corporate disclosure; checked October 2, 2026

Humanoid ankle joint supplier FAQ

Are the companies listed confirmed complete ankle suppliers?

No. The linked public pages document components, joint actuators or broader humanoid-actuator activity. None of those pages establishes a qualified complete ankle for your robot. Verify current availability and the proposed model directly.

What is the difference between a reducer supplier and an ankle supplier?

A reducer supplier may provide only the transmission. A joint-actuator supplier may integrate the motor, encoder and driver. A complete ankle supplier also needs a defined pitch/roll assembly, interfaces and system-level acceptance responsibility.

How can I compare China ankle actuator supplier quotes?

Normalize model and BOM, interfaces, ratings and test conditions, sample acceptance, NRE, MOQ, lead time, shipping, warranty and support. Do not compare a reducer-only quote with a complete module price.

What should I request before ordering an engineering sample?

Request the model-specific drawing and BOM, torque-speed and thermal data, bearing limits, control interfaces, sample test method, acceptance limits, price, lead time and ownership of integration work.

Does a listed rated or peak torque prove ankle suitability?

No. Suitability depends on the intended axis load history, speed, duty, bearings, mounting, cooling and the limits of the complete assembly. Ask for test conditions and validate a representative sample.

How do I check whether a company is the manufacturer or a trading company?

Ask for the contracting entity, production site, authorized sales status and which operations are subcontracted. Match the answers to the quoted product, drawing revision and quality records before placing an order.

Are MOQ, current pricing and delivery times published here?

No. The public sources cited here do not establish current ankle-specific MOQ, pricing or lead time. Request a dated quote for the same BOM, quantity, delivery destination and support scope.

When should I move from a sample to a pilot order?

Only after the sample passes an agreed test, the production drawing and BOM are frozen, open deviations have owners, and the supplier has accepted pilot traceability and change-control requirements.

Ready to compare an ankle supplier proposal?

Send the proposed BOM, interface drawing and test conditions so our team can review the integration questions with you.

Request an engineering review